====== Anycubic Photon M7 Pro ======

{{ :m7_pro详情页-en.png?nolink |}}

This is currently our best SLA printer. It has high resolution, a large capacity heated resin vat, a pump for adding/removing resin without removing the vat (including mid-print), and auto-leveling among other features.

===== Setup Procedures =====

Generally this printer is set up with Anycubic ABS-Like Resin v2 Gray (water washable) which it loads and unloads automagically via the resin pump on the rear right corner of the printer. You can access the fill/drain functionality via the touchscreen. If there is not resin currently in the printer when you are scheduled to use it, please check in with Andrew or Sundog to get trained on making sure the printer is ready for the resin you'd like to use.

===== Printing Procedure =====

===== Post-Print Cleanup Procedure =====

===== Maintenance Procedures =====

===== Known-Good Resin Settings =====

===== Links =====

  * [[https://wiki.anycubic.com/en/resin-3d-printer/photon-mono-m7-pro|Manufacturer's Support Page for M7 Pro]]
  * {{ ::m7_pro_manual.pdf |M7 Pro Manual}}