Differences

This shows you the differences between two versions of the page.

--- plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray [2025/03/06 23:25] – sundog
+++ plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray [2025/03/07 21:09] (current) – add profile types, fast setting for M7 Pro sundog
@@ Line 5: / Line 5: @@
 [[https://store.anycubic.com/products/abs-like-resin-v2]]
+This is a good general purpose resin for our mold making efforts as well as for other parts at times.
+It's water washable, which simplifies post-print processing dramatically, but it's also quite durable in our experience.
+It does have noticeable issues in terms of dimensionality if the print settings are not dialed in just right.
+===== Settings =====
+^ Printer Model 	^ Profile Type ^ Layer Thickness 	^ Exposure Time 	^ Light-Off Time 	^ Bottom Exposure Time 	^ Bottom Layer 	^ Anti-Aliasing Level 	^ Z Lift Distance 	^ Z Lift Speed 	^ Z Retract Speed  ^
+| Photon Mono M7 Pro 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 25s 	| 4 	| 1 	| 8mm 	| 6mm/s 	| 6mm/s  |
+| Photon Mono M7 Pro 	| Fast   | 0.1mm 	| 3.7s 	| 0.5s 	| 25s 	| 4 	| 1 	| 8mm 	| 12mm/s 	| 12mm/s  |
+| Photon Mono X 6K 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 23s 	| 6 	| 1 	| 8mm 	| 2mm/s 	| 3mm/s  |
+| Photon Mono 4K 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 40s 	| 6 	| 1 	| 6mm 	| 4mm/s 	| 6mm/s  |
+===== Use Journal =====
+TODO: //add info on usage tracking here and a template to make it easy to add new entries//

Ellijay Makerspace Project Wiki