Ellijay Makerspace Project Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Anycubic ABS-Like Resin v2 - Gray ======

{{ :plastics:3d_printing_resins:abs-likeresinv2_gray.webp | Product Photo}}


[[https://store.anycubic.com/products/abs-like-resin-v2]]

This is a good general purpose resin for our mold making efforts as well as for other parts at times.

It's water washable, which simplifies post-print processing dramatically, but it's also quite durable in our experience.

It does have noticeable issues in terms of dimensionality if the print settings are not dialed in just right.

===== Settings =====

^ Printer Model 	^ Profile Type ^ Layer Thickness 	^ Exposure Time 	^ Light-Off Time 	^ Bottom Exposure Time 	^ Bottom Layer 	^ Anti-Aliasing Level 	^ Z Lift Distance 	^ Z Lift Speed 	^ Z Retract Speed  ^
| Photon Mono M7 Pro 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 25s 	| 4 	| 1 	| 8mm 	| 6mm/s 	| 6mm/s  |
| Photon Mono M7 Pro 	| Fast   | 0.1mm 	| 3.7s 	| 0.5s 	| 25s 	| 4 	| 1 	| 8mm 	| 12mm/s 	| 12mm/s  |
| Photon Mono X 6K 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 23s 	| 6 	| 1 	| 8mm 	| 2mm/s 	| 3mm/s  |
| Photon Mono 4K 	| Normal | 0.05mm 	| 2s 	| 0.5s 	| 40s 	| 6 	| 1 	| 6mm 	| 4mm/s 	| 6mm/s  |
 

===== Use Journal =====

TODO: //add info on usage tracking here and a template to make it easy to add new entries//

Ellijay Makerspace Project Wiki

User Tools

Site Tools

Page Tools