Ellijay Makerspace Project Wiki
Project info, runbooks, and standard operating procedure docs of the Ellijay Makerspace
User Tools
plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray [2025/03/07 01:07] – add published materials settings for printers sundog | plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray [2025/03/07 21:09] (current) – add profile types, fast setting for M7 Pro sundog | ||
|---|---|---|---|
| Line 14: | Line 14: | ||
| ===== Settings ===== | ===== Settings ===== | ||
| - | ^ Printer Model ^ Layer Thickness ^ Exposure Time ^ Light-Off Time ^ Bottom Exposure Time ^ Bottom Layer ^ Anti-Aliasing Level ^ Z Lift Distance ^ Z Lift Speed ^ Z Retract Speed ^ | + | ^ Printer Model ^ Profile Type ^ Layer Thickness ^ Exposure Time ^ Light-Off Time ^ Bottom Exposure Time ^ Bottom Layer ^ Anti-Aliasing Level ^ Z Lift Distance ^ Z Lift Speed ^ Z Retract Speed ^ |
| - | | Photon Mono M7 Pro | 0.05mm | 2s | 0.5s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s | | + | | Photon Mono M7 Pro | Normal |
| - | | Photon Mono X 6K | 0.05mm | 2s | 0.5s | 23s | 6 | 1 | 8mm | 2mm/s | 3mm/s | | + | | Photon Mono M7 Pro | Fast | 0.1mm | 3.7s | 0.5s | 25s | 4 | 1 | 8mm | 12mm/s | 12mm/s | |
| - | | Photon Mono 4K | 0.05mm | 2s | 0.5s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s | | + | | Photon Mono X 6K | Normal |
| + | | Photon Mono 4K | Normal | ||
plastics/3d_printing_resins/anycubic_abs-like_resin_v2_gray.txt · Last modified: by sundog
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
