Ellijay Makerspace Project Wiki
Project info, runbooks, and standard operating procedure docs of the Ellijay Makerspace
User Tools
plastics:3d_printing_resins:anycubic_abs-like_resin_v2_gray
This is an old revision of the document!
Table of Contents
Anycubic ABS-Like Resin v2 - Gray
https://store.anycubic.com/products/abs-like-resin-v2
This is a good general purpose resin for our mold making efforts as well as for other parts at times.
It's water washable, which simplifies post-print processing dramatically, but it's also quite durable in our experience.
It does have noticeable issues in terms of dimensionality if the print settings are not dialed in just right.
Settings
| Printer Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layer | Anti-Aliasing Level | Z Lift Distance | Z Lift Speed | Z Retract Speed |
|---|---|---|---|---|---|---|---|---|---|
| Photon Mono M7 Pro | 0.05mm | 2s | 0.5s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono X 6K | 0.05mm | 2s | 0.5s | 23s | 6 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon Mono 4K | 0.05mm | 2s | 0.5s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
Use Journal
TODO: add info on usage tracking here and a template to make it easy to add new entries
plastics/3d_printing_resins/anycubic_abs-like_resin_v2_gray.1741309647.txt.gz · Last modified: by sundog
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
